DAP03 AC Spindle Servo Driver

Servo Driver unit type

DAP03-037

DAP03-055

DAP03-075

DAP03-110

Continuous output power (S1)

3.7kW

5.5kW

7.5kW

11kW

30min output power (S2)

5.5kW

7.5kW

11kW

15kW

Input power supply

3 three-phase AC380V(-15%~+10%)  50/60Hz

Working mode

Internal speed run, external speed run, Jog, trial run, position run, speed/position switch run

Constant torque timing ratio

1000:1(corresponding motor speed 1.5~1500 r/min)

Constant power timing ratio

4:1(corresponding motor speed 1500~6000r/min)

Stead speed precision

Foundation speed(rated speed)×0.1%

Speed control mode

Speed closed loop control with speed feedback

External speed command input

-10V~+10V or 0~+10V

Speed feedback input

Incremental rotation encoder signal feedback, lines 128~8000p/r,A/B/Z differential signal

Position run mode

Input mode

1.pulse+direction 2.CCW pulse/CW pulse 3.A/B two phases orthogonal pulse

Electronic gear ratio

gear ratio numerator 1~32767

gear ratio denominator 1~32767

Orientation function

Set 8 orientation points on the motor encoder or the spindle encoder, the external contact selects the orientation point, start motor(spindle) orientation, orientation angle deviation≤

Spindle position feedback input

Incremental rotary encoder signal fee, lines  128~8000p/r,A/B/Z differential signal

Position feedback output

Motor encoder or spindle encoder signal 1:1 output, A/B/Z differential signal

Control input signal

7 input interfaces: servo enabling, zero speed clamp, CCW, CW, speed(orientation point), orientation start, speed/position switch and so on

Control output signal

7 output interfaces: alarm, ready, speed arrival, orientation completion, zero speed output, speed/position switch, motor Z pulse

Protection function

Protection from overvoltage, undervoltage, overspeed, overcurrent, overload, overheat, abnormal encoder and so on.

Display function

6-bit LED,displaying software/hardware version, working

mode, current speed, speed command, encoder position/state,

current, torque, I/O state, busbar voltage, alarm code, parameter and so on

Operation function

5 pressing keys to select working mode and display content to modify parameters and so on .

External brake resistance

Refer to Brake Resistance Allocation Table

Storage temperature and humidity

Below -40~55°C / 95%RH(40°C)

Working temperature/humidity

0~40°C / 30%~95%(no dewing )

Vibration

≤0.6G(5.9m/s2)

Protection grade

IP20

Appearance dimension

214.5×362×229mm